Features

♦ATE systems for R&D, design verification and manufacturing
♦Compact size: 1U single unit outputs up to 8 channels
♦Flexible modular system: mix and match various modules
♦2 mainframes (1U), 3 module types (DC power supply, bidirectional power supply,
regenerative load)
♦Free PC software PV2700, display 8-channel output
♦Oscilloscope function: Capable of digitizing voltage and current with a frequency of
up to 200kHz and a memory depth of 600kpts*1
♦Data logging function: Up to 50kHz sampling rate, with 2GB internal memory in the
instrument and unlimited recording capability on the host computer.
♦The electrically isolated source load module supports 8 modules in master-slave
parallel connection up to 2kW*2
♦Load function: support CC, CV, CP, CR, CC+CV, CR+CV, CP+CV, CC+CR, AUTO,BSIM (battery simulation)
♦Supports automatic switching for CV, CC, and CP, with selectable CC & CV priority,
and internal resistance setting.
♦Bidirectional power supply module supports resistance setting in load mode
♦All modules are wide-range modules
♦Single module voltage up to 150V, current up to 30A, power up to 500W
♦Supports synchronous control between different frames, no
upper limit of channels
♦Rich trigger output and input, support step trigger output, can trigger
other modules (acquisition, oscilloscope, data recording, etc.)
♦Measurement functions: multi-output/single-output display, supports average, minimum and maximum values of V/I/P, and calculates P, Ah and Wh for all outputs
♦Output functions: list function, arbitrary waveform, sweep, arbitrary wave sequence, constant dwell arbitrary wave, load transient, battery simulation*3, battery test, OCP and OPP test*4, output on/off serialization, Watchdog, support output coupling
♦Full protection: OVP, UVP, OCP, OPP, OTP, UCP, Foldback, supports protection coupling
♦Modules has anti-reverse connection protection and built-in relay
♦Support Web control, use common browser to realize all functions AC input: adaptive 100-380 V ac single phase
♦Built-in LAN, USB-TMC,USB-VCP, CAN, digital I/O, data import and export by USB and supports SCPI and Modbus protocol
*1 The oscilloscope functions of the 1U mainframe can be operated via PV2700 software.
*2 One mainframe supports only one set of master-slave parallel connections
*3 only available for bidirectional power supply modules
*4 only available for load modules

   *IT27xxx    should be equipped with IT2702 or IT2704

List sequence

By editing the voltage, current, pulse width and slope of each step, it can generate a variety of complex sequences, help you complete various loading tests and import or export the files.

Multiple operation modes

IT2700 load provides 10 operating modes. In addition to CC, CV, CR, and CP, it also includes 5 compound modes: CC+CR mode, which is often used in OBC voltage limiting, current limiting characteristic tests, constant voltage accuracy, and constant current accuracy tests to avoid OCP of the OBC. The CR+CV mode is used to simulate LED lights, test the LED power supply, and acquires the current ripple.The CP+CV mode can replace the VON point setting or be used for battery discharge testing, and the voltage setting point can be used as the cut-off voltage. CC+CV mode can be used to simulate batteries, test charging piles or chargers, and limit the maximum load current while CV is working. AUTO mode allows it to be automatically
switch between CV, CR, CC and CP modes. When the DUT's protection circuit is damaged, the mode can be automatically switched to avoid DUT damage.
BSIM (Battery Simulation) mode can output a voltage to simulate a battery for testing chargers and other equipment.

Output on/off serialization

The on/off delay function for each output allows you to serialize the on/off of the output.

Coupling - Channel grouping function

• Grouping with different frames

• Controlled by LAN, no limit of channels

• Control includes setting voltage and current |ON by group|Start a function |Trigger

• Output grouping, protection grouping and stop output grouping (emergency stop grouping) can be set separately

Free PC software

IT2700 comes with free software PV2700 and Web control functions. Both support the Windows 11 operating system. The graphical interface is more intuitive. Using the host computer software is more convenient for oscilloscope display, data recording display, battery simulation and editing of various complex waveforms.